Traditional vs. Modern: A Brief Bonding Guide. (Advanced Sensors Technology)

If you want to add modern style CEA to your stress analysis system, then you will need to learn about using M-Bond 200 with Advanced Sensors Technology CEA strain gages.


Micro-Measurements Certified M-Bond 200 is an excellent general-purpose laboratory adhesive because of its fast room-temperature cure and ease of application. When properly handled and used with the appropriate strain gage, M-Bond 200 can be used for high-elongation tests in excess of 50,000 microstrain (µε) , for fatigue studies, and for one-cycle proof tests up to +200 °F [+95 °C] or down to -300 °F [-185°C]. The normal operating temperature range is -25° to +150°F [-30° to +65°C]. M-Bond 200 is compatible with all Micro-Measurements strain gages and most common structural materials. When bonding to plastics, we recommend testing a small sample area to ensure compatibility. For best reliability, it should be applied to surfaces between the temperatures of +70° and +85°F [+20° to +30°C], and in a relative humidity environment of 30% to 65%.

M-Bond 200 catalyst has been specially formulated to control the reactivity rate of this adhesive. The catalyst should be used sparingly for best results. Excessive catalyst can contribute many problems; e.g., poor bond strength, age-embrittlement of the adhesive, poor glueline thickness control, extended solvent evaporation time requirements, etc.

Since M-Bond 200 bonds are weakened by exposure to high humidity, adequate protective coatings are essential. This adhesive will gradually become harder and more brittle with time, particularly if exposed to elevated temperatures. For these reasons, M-Bond 200 is not generally recommended for installations exceeding one or two years.  (Typically not more than one year).

M-Bond 200 Kit






Training Programs and Schedules

StrainTalks™ seminar: