August 2017

August 31, 2017 - 8:50am
This Micro-Measurements® iNotes™ video shows correct installation of a precabled, miniature strain gage produced using Micro-Measurements Advanced Sensors® technology on a printed circuit board (PCB...
August 28, 2017 - 12:29pm
In this iNotes video, Donielle uses a strain gage (gauge) and thermocouple as sensor inputs to the StrainSmart System 8000.  StrainSmart software is then used to set limit conditions on the sensor...
August 22, 2017 - 7:30am
We recently received the following feedback from a customer regarding a successful installation of strain gages (gauges) on glass: “Thanks for all the help in solving my strain gage adhesion problem...
August 18, 2017 - 12:34pm
The ATS-2 Application Tool Kit contains all of the recommended hand tools necessary to complete a strain gage installation. http://www.vishaypg.com/doc?11021          
August 18, 2017 - 11:29am
The RJ45 connector provides a reliable connection for a strain gage to a measurement instrument or data system.  However, it is important to use a high quality tool to crimp the connector.  An...
August 17, 2017 - 8:43am
One microstrain is one part-per-million.  This is the equivalent of resolving 1 cm out of 10 kilometers!  A strain gage can easily resolve 1 microstrain, as long as a quality instrument is utilized...
August 15, 2017 - 8:51am
In this Micro-Measurements® iNotes™ video, Miguel Bravo and Kevin Swiger  check the installed strain gauge (C2A-13-125LT-350), and measure strain using a Micro-Measurements P3 Strain Indicator and...
August 15, 2017 - 8:46am
  In this Micro-Measurements® iNotes™ video, Miguel Bravo and Kevin Swiger  illustrate the entire process of bonding a pre-cabled strain gauge (C2A-13-125LT-350) to Aluminum using M-Bond 200 Adhesive...
August 10, 2017 - 7:30am
A customer recently asked the following question: Can you tell me if strain gages can be installed on anodized surfaces using M-Bond 200?  I’m concerned about aluminum anodized and sealed per MIL-A-...
August 8, 2017 - 7:30am
1.  通过应变片测试法来得到齿根部位的弯曲应力。 2.  使用通用型小尺寸的应变片。 3.  Micro-Measurements 的防护涂层M-Coat A提供优异的防潮和防化学侵蚀性能。 当然布点方式也很有技巧性。直齿轮齿根承受一个水平面弯曲正应力和垂直切应力,两个应力都垂直与齿向;而斜齿轮齿根除承受与直齿轮相同方向的两个应力外,还承受一个铅垂面内的平行于齿向的切应力,...

Pages