Latest
August 15, 2017
In this Micro-Measurements® iNotes™ video, Miguel Bravo and Kevin Swiger check the installed strain gauge (C2A-13-125LT-350), and measure strain using a Micro-Measurements P3 Strain...
August 15, 2017
In this Micro-Measurements® iNotes™ video, Miguel Bravo and Kevin Swiger illustrate the entire process of bonding a pre-cabled strain gauge (C2A-13-125LT-350) to Aluminum...
August 10, 2017
A customer recently asked the following question:
Can you tell me if strain gages can be installed on anodized surfaces using M-Bond 200? I’m concerned about aluminum anodized and...
August 8, 2017
1. 通过应变片测试法来得到齿根部位的弯曲应力。
2. 使用通用型小尺寸的应变片。
3. Micro-Measurements 的防护涂层M-Coat A提供优异的防潮和防化学侵蚀性能。
当然布点方式也很有技巧性。直齿轮齿根承受一个水平面弯曲正应力和垂直切应力，两个应力都垂直与齿向；而斜齿轮齿根除承受与直齿轮相同方向的两个应力外，...
August 3, 2017
A customer recently asked the following question:
We are using the M-Bond 610, and following your guidelines for this adhesive. The strain gages that we’ve bonded appear to work well,...
August 1, 2017
A half-bridge in the form of a 0-90 degree Tee rosette can be used for a uniaxial strain measurement with excellent temperature compensation, but only under specific conditions. These...
July 27, 2017
What if you could take your sensitive test equipment, using Micro-Measurements strain gages, and strap it to a vehicle racing through a rugged test course? With WISER wireless sensors from TECAT...
July 25, 2017
Zero-drift and zero-shift in a strain gage Wheatstone Bridge circuit can arise from a number of sources, including the gage installation itself. The following checklist gives the recommended...
July 20, 2017
Structural test labs often need to test structures to failure, stopping the applied load once a surface crack has formed in the part. In some applications, thin copper wires (commonly 44 AWG) bonded...
July 18, 2017
Darryl Peterson and Matt Saas discuss the material property and measurement situations that influence the decision as to the use of planar or stacked strain gage rosettes.
- ‹ newer posts
- 35 of 59
- older posts ›
